Topclear removable coatings cleaner

FOR REMOVING OF ECLIPSE LD, TRANSPAR, OPTIFUSE & OPTIFUSE IR

Topclear is the cleaner to remove the Sudlac coatings Eclipse LD, Transpar, Optifuse en Optifuse IR. By using Topclear a grower has full control over when the coating is to be removed..

Topclear product shot

manual-01-4
Manual application

Amount of Topclear Amount of water Total amount of spraying liquid
per ha per acre per ha per acre per ha per acre
Cans Liter Cans US gallon  Liter  US gallon  Liter  US gallon
12 240  5  25  1260  375  1500  400

machine-01
Machine application

Amount of Topclear Amount of water Total amount of spraying liquid
per ha per acre per ha per acre per ha per acre
Cans Liter Cans US gallon Liter US gallon Liter US gallon
12 240 5 25 1260 375 1500 400

helicopter-01
Helicopter application

Amount of Topclear Amount of water Total amount of spraying liquid
per ha per acre per ha per acre per ha per acre
Cans Liter Cans US gallon Liter US gallon Liter US gallon
12 240 5 25 1260 375 1500 400

What is Topclear

Topclear is the cleaner to remove the Sudlac coatings Eclipse LD, Transpar, Optifuse en Optifuse IR. By using Topclear a grower has full control over when the coating is to be removed.

Usage

Mix Topclear with the necessary amount of clean water. Apply the solution evenly onto a dry greenhouse surface under dry weather conditions and a minimum temperature of 5°C (40°F) .
Minimal reaction time is 20 minutes before rinsing with water or brushing. Considerable rainfall will wash away the coating. Only apply Topclear if considerable rainfall is expected in the next few days. Removal with roof sprinklers is not recommended.

For removal of Optifuse and Optifuse IR:
Apply Topclear in the advised amount and dilution within 3 days before considerable rainfall. A brushing machine should be available in case the cleaning result is not satisfactory.

Mixing

First fill the mixing container with half the amount of needed water. Add Topclear and start mixing. Add more water to get the total amount of needed mixture. Mix with sufficient force until it has formed into a homogeneous mixture. Now the mixture is ready to use.

Storage

Shake before use. Keep from freezing

Environment

Rinse water can run off into surface water if surrounding waterways are suitable in size and water volume. Should the rinse water run into the basin, test suitability before use as the pH might increase.

Safety

The use of safety glasses and mask are recommended when handling or applying Topclear. In case of contact with skin or eyes, rinse thoroughly with clean water. If ingested, seek medical attention.

Disclaimer

The provided information is based on average observed results. Our suggestions do not relieve the user of the necessity to test our products and to verify suitability for the purpose.

Sudlac is a producer of tried and trusted coatings & shading paints, line marking paints and maintenance paints.