• Temporary coatings

      Shading coatings that wear off gradually over time and do not need to be cleaned off at the end of the season. This range is designed to offer growers an effective, user-friendly solution.

      Temporary protection from light and heat for different periods of time without having to clean the paint off at the end of the season.

    • Removable coatings

      Often called On/Off, these coatings produce results that are stable over time until removed using the appropriate cleaning product.

      Removable protection against heat and light

      Removable protection from heat while maintaining grow-light

      Cleaning agent for removing shading agents


      Not entirely sure which solution fits your needs best? We’ve collected some resources to help you out.

      Online Product Advice

      Get instant product advice in 5 easy steps.

      Understanding light

      How do our coatings influence the sunlight?

      Frequently Asked Questions

      Quick answers to frequently asked questions.

      How to apply Sudlac coatings

      Instructions for application of our coatings on your greenhouse

  • Contact

Application methods

The shading compounds from Sudlac can be applied and removed in various easy and responsible ways. In general, applications only take place during dry weather circumstances and when no percipitation is expected during the drying process.

Manual application

manual-01-4 Manual application

Easy to use

Our products are manually applied worldwide with great results. Most of the available spray equipment used at greenhouse operations will be suitable for such applications. Make sure that the capacity of the spray equipment is suited for the surface to be applied.

Machine application

machine-01 Machine application

Better results

Our coatings are more and more often applied by machine. Machine applications usually give better results and are more economical in use due to lower use of product. Ask your equipment provider for specific instructions.

Aerial application

helicopter-01 Aerial application

Specific expertise

Helicopter or airplane applications require very specific expertise. If desired, you can contact us for technical advice.

Application and handling


Mix the coating with the desired amount of clean water prior to applying it to the greenhouse surface with the appropriate spray equipment. the coating is very wear resistant and can be removed at any time with the use of Topclear.


First fill the mixing container with half the amount of needed water. Add the coating and start mixing. Add more water to get the total amount of needed mixture. Mix with sufficient force until it has formed into a homogeneous mixture. Scrape the bottom of the container to check that there is no residue. Now the mixture is ready to use. See product pages for dilution tables.


Only apply the coating in fast drying circumstances to ensure the coating is fully dried before dusk. Rainfall the same day of application can damage the coating. the coating should only be applied at temperatures above 10°C (50°F).


Unopened container of the coating can be stored for 2 years. Stir before use if product is older than 1 year. Protect from freezing.


Our coating is a waterbased product that contains no environmental harmful ingredients. Prevent discharge onto surface water as discoloration can occur. Sudlac is involved in Responsible Care®. 


In case of eye or skin contact rinse with water. If swallowed, seek medical attention.


The provided information is based on average observed results. Our suggestions do not relieve the user of the necessity to test our products and to verify suitability for the purpose.